Scratch no More

Footfixx Wood 3.0

Regular price
€2,02
Sale price
€2,02
Regular price
Screw-on glides for wooden legs with a straight or slanted base of at least ⌀11 mm and a max. angle of 30°.
Equipped with 100% scratch-free polyamide fibres
Sustainable floor protection – lasts up to 8 times longer than felt

Article number : SKU: 10-2075

  • Guaranteed to be scratch-free
  • Orders placed before 4:00 pm on working days are dispatched the same day.
  • Over 11,000 positive customer reviews
Product features
  • Types of flooring: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
  • Material: plastic equipped with scratch-proof polyamide fibres.
  • Installation: one-time mounting of the screw-on base part, replaceable glide foot.
  • Glide surface: ⌀28 or ⌀34 mm. Select ⌀34 mm for rough surfaces, intensive sliding or heavy furniture.
  • Furniture height: furniture is raised by a maximum of 20 mm.
Important information

The glide foot is clicked onto the base part’s round ball joint, enabling it to tilt at an angle of up to 30 degrees and automatically levelling out slight inclinations of the leg base to the ground. The Footfixx Wood 3.0 is suitable for virtually any wooden furniture leg, with a straight or slanted base, and even those with a diameter of as little as 11 mm.

For wooden legs with a straight base standing flat on the floor, the Footfixx Wood is also perfectly suitable.

Please note that our glides require occasional maintenance.

Mounting instructions

Please follow the steps below in order to mount the Footfixx Wood:

  • Remove the original plastic end cap, if present.
  • For harder types of wood or thin chair legs, we recommend pre-drilling a small hole to facilitate fastening the base part.
  • Screw the base part into the centre of the furniture leg’s base.
  • Click the glide foot onto the base part.
Watch video

A system that stays put

A good furniture glider should not only protect, but also stay firmly in place. That’s why Scratch no More uses a complete mounting system. The glider is securely fixed to the chair, preventing it from shifting or coming loose. This ensures the protection stays exactly where it’s needed. Even with heavy use, the system remains reliable. A durable and practical solution.

Felt-free and scratch-free

Felt may seem like a logical choice for floor protection, but in practice it’s not very effective. Dirt builds up under chair legs, causing wear and tear on your floor. Scratch no More protective caps work differently. They are made from Dry-Walk carpet material that prevents dirt from building up. As a result, chairs continue to move smoothly without causing scratches. Your floor stays protected and looking its best for longer.

Made to last for years

Many floor protectors need replacing regularly. Scratch no More glides are made to last. With normal use and proper care, they can last up to eight times longer than felt. The durable material continues to glide smoothly and retains its performance. This means you’ll need to replace them less often. A sustainable solution you can rely on for years to come.

Didn't find what you were looking for?

With the product finder, you’ll always make the right choice!

Start product finder