Footfixx Wood 3.0

The glide foot is clicked onto the base part’s round ball joint, enabling it to tilt at an angle of up to 30 degrees and automatically levelling out slight inclinations of the leg base to the ground. The Footfixx Wood 3.0 is suitable for virtually any wooden furniture leg, with a straight or slanted base, and even those with a diameter of as little as 11 mm.

For wooden legs with a straight base standing flat on the floor, the Footfixx Wood is also perfectly suitable.

Mounting instructions:
Please follow the steps below in order to mount the Footfixx Wood 3.0:

1. Remove the original plastic end cap, if present.
2. For harder types of wood or thin chair legs, we recommend to pre-drill a small hole to facilitate fastening the base part.
3. Screw the base part into the centre of the furniture leg’s base.
4. Click the glide foot onto the base part.

Maintenance:
In order for the glides to protect your floor effectively as long as possible, regular cleaning is advised. Use a vacuum cleaner, brush or wet cloth to remove debris, and allow the polyamide fibres to recover.