Footfixx Hollow 3.0

Do not use the Footfixx Hollow 3.0 for drop-shaped, diagonally cut, oval or rectangular furniture legs. Use the Footfixx Wood instead and screw it into the original plastic insert.

Please note that our glides require occasional maintenance.

Note for bent chair legs:
Some chairs have slanted legs which are bent towards the end of the tube, making the bottom part of the chair legs straight. For this particular type of chair legs, the length of this straight bottom part is very important:

• Length base part of Footfixx Hollow 3.0 small: 30 mm
• Length base part of Footfixx Hollow 3.0 medium: 36 mm
• Length base part of Footfixx Hollow 3.0 large: 52 mm

If the length of the straight bottom part is longer than the length of the base part listed above, the Footfixx Hollow 3.0 is not suitable for your chairs. Instead, the Footfixx Wood can be used by screwing it into the original plastic inserts of the chair legs.

*Put foam or another filling around the base part in order to reduce the inner dimensions of the tubular leg for the base part to stay in place.

Mounting instructions:
Please follow the steps below in order to mount the Footfixx Hollow 3.0:

1. Remove the original plastic insert from the tubular chair leg.
2. Insert the base part into the tube as far as possible.
3. Tighten the base part with an Allen key until it is fastened securely.
4. Click the glide foot onto the base part until it locks into place.

Maintenance:
In order for the glides to protect your floor effectively as long as possible, regular cleaning is advised. Use a vacuum cleaner, brush or damp cloth to remove debris, allowing the polyamide fibres to recover.