Footfixx Threaded

Article number: 10-3007

Threaded furniture glides, also suited for angled legs up to a 30-degree angle.

  • Furniture leg type: all straight and angled legs with M5, M6, M8 or M10 internal thread.Always measure the width of the threaded bolt with a calliper!
  • Types of flooring: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
  • Material: plastic equipped with scratch-proof polyamide fibres.
  • Installation: one-time mounting of the threaded base part, replaceable glide foot.
  • Glide surface: ⌀28 or ⌀34 mm. Select ⌀34 mm for rough surfaces, intensive sliding or heavy furniture.
  • Furniture height: furniture is raised by a maximum of 25 mm.

Please note that our glides require occasional maintenance.

2,40 per piece

Quantity:
Please note: You need 4 pieces for 1 chair!

Complete system
Complete
system
Guaranteed scratch-proof
Guaranteed
scratch-proof
One-time mounting
One-time
mounting
Replaceable glides
Replaceable
glides
Durable
Durable
Noise reducing
Noise
reducing

The glide foot is clicked onto the base part’s round ball joint, enabling it to tilt at an angle of up to 30 degrees and automatically levelling out slight inclinations of the furniture leg to the ground.



Download measuring & mounting instructions

Mounting instructions:
Please follow the steps below in order to mount the Footfixx Threaded:

  1. Screw the base part into the internal thread of the furniture leg.
  2. Click the glide foot onto the base part.

Maintenance:
In order for the glides to protect your floor effectively as long as possible, regular cleaning is advised. Use a vacuum cleaner, brush or wet cloth to remove debris, and allow the polyamide fibres to recover.

Download measuring & mounting instructions