Multifixx

Article number: 10-7000

Universal glide measuring 50×26 mm for cantilever chairs with a square, rectangular or flat-sided oval tube frame and other even surfaces that are level with the floor.

  • Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
  • Material: plastic equipped with scratch-proof polyamide fibres.
  • Installation: one-time mounting of the screw-on/stick-on base part, replaceable glide foot.
  • Glide surface: 50×26 mm. Is the surface smaller than 26 mm? Use our Minifixx instead.
  • Furniture height: furniture is raised by a maximum of 11 mm.

Please note that our glides require occasional maintenance.

2,09 per piece

Size:
50×26 mm

Quantity:
Please note: You need 4 pieces for 1 chair!

Complete system
Complete
system
Guaranteed scratch-proof
Guaranteed
scratch-proof
One-time mounting
One-time
mounting
Replaceable glides
Replaceable
glides
Durable
Durable
Noise reducing
Noise
reducing

The base part is equipped with a self-adhesive strip and additionally comes with two self-tapping screws.

The self-adhesive strip is only suited for use on metal surfaces (degrease thoroughly prior to applying the base part). On all other surfaces such as plastic or wood, the base part must be mounted with the provided screws.



Download measuring & mounting instructions

Mounting instructions:
Please follow the steps below in order to mount the Multifixx:

  1. Degrease the surface thoroughly, e.g. with an alcohol wipe or another degreaser. When the surface is made of plastic (PP or PE), a primer for PP/PE needs to be applied first!
  2. Remove the protective sheet from the base part’s adhesive strip and press the base part on the surface firmly. On surfaces made of wood or plastic, this step holds the base part in place until it is fastened with the screws.
  3. Optional for metal: Pre-drill small holes of 3 mm in diameter, through the screw holes of the base part, into the surface.
  4. Optional for metal: Screw the 2 provided screws into the surface until the screws are flush with the base part.
  5. Click the glide foot into the base part until it is locked in place.

Maintenance:
In order for the glides to protect your floor effectively as long as possible, regular cleaning is advised. Use a vacuum cleaner, brush or wet cloth to remove debris, and allow the polyamide fibres to recover.

Download measuring & mounting instructions