Chairfixx

The pin of the Chairfixx has a width of 5 to 6 mm. Always read the instructions before assembling the Chairfixx.

We recommend using at least 4 Chairfixx per chair. When you have a rough floor or particularly heavy chairs, use 5 or 6 Chairfixx per chair.

Mounting instructions:
Please follow the steps below in order to mount the Chairfixx:

1. Remove the current glide or cap from the chair’s tube frame.
2. If the tube has holes for glides, clamp the Chairfixx around the tube making sure the pin of the clamp shell is positioned in the hole. If the tube does not have holes, remove the Chairfixx’s pin (if present) and apply double-sided adhesive tape to the inside of the clamp shell before clamping the Chairfixx onto the tube.

Please note: Do not position the Chairfixx at the very ends of the tube frame, but a few centimetres back. Moreover, the position of the glides on the left and right side of the frame needs to be aligned.

Maintenance:
In order for the glides to protect your floor effectively as long as possible, regular cleaning is advised. Use a vacuum cleaner, brush or wet cloth to remove debris, and allow the polyamide fibres to recover.